Thursday, October 16, 2014

Kent Engine series Water Pumps and W/P Pulleys

Two types of water pumps (w/p) : 105E and uprated Capri / Pinto 1600.

105E type:

W/P: Ford p/n: 105E-8501A. Quinton Hazel p/n: QCP-181.
Dimensions: Hub 2 5/8". Center of Hub 3/4". Hub bolt holes 3/16". Shaft diameter: 1/2".

W/P Pulley:  single groove w/o emission p/n: 105E-8509B. double groove w/emission p/n: 2737E-8509B.
Dimensions: width 4 1/4". height 1 7/16".

All U.S.A. EnFo imported models are equipped with the 105E type w/p's:
Anglia 105E, Prefect 107E, Consul / Classic / Capri 109E, Cortina MK1/2.

Cortina MK2 Master Parts Catalog lists W/P p/n: DORY-8501A and with DORY-8509B W/P pulley.
This is an uprated W/P version ( and matching pulley ) of the 105E W/P and not supplied on smog equipped models.

Uprated 1600 type:

W/P: Ford p/n: DORY-8501A. 691F-8501AA. 682F-8501A. Quiton Hazel p/n: QCP-730.
Dimensions: Hub 2 5/8". Center Hub 15/16". Hub bolt holes 5/16" Shaft diameter: 5/8". Heavy Duty Casting. On 711M block and after.

W/P Pulley: p/n: DORY-8509B
Dimensions: width 4 1/4" height 1 5/8".
Left to Right: p/n 2737E-8509B, p/n 105E-8509B, p/n DORY-8509B

Left to Right:  p/n 105E-8501A, p/n DORY-8501A

Water Pump Spacer p/n 2730E-8A645A

105E Pump with Spacer


Uprated W/P can be a replacement for the 105E W/P. You would need to use the matching DORY-8509B
pulley and enlarge the center hole of the fan blade to 15/16" and increase the bolt holes to 5/16".

A fan blade spacer p/n: 2730E-8A645A provided for the Cortina MK2. This part is not listed in the Cortina "C" Master Parts Catalog. The spacer should be installed on all MK2 105E type W/Ps either for metal or plastic fan blades.

All impellers should be made of metal, cast iron or steel, some after market 105E type W/P's had plastic impellers-don't use. They will come loose or melt from high heat.








No comments:

Post a Comment